Junk Created Water Wheel
This water wheel was made, according to Ren Gomes,
…mostly out of scrap material as are most of my projects. The steel center portion of the wheel is made from a used electrical spool cut down from about 3′ to 1′ in width. Then with a whole lot of scrap wood laying around, I built the wheel and the water trough. The ponds are made from an old 500 gallon fuel tank cut in half and sunk into the ground. A small pond pump which my neighbor gave me, pumps around two gallons a minute which is plenty to get this thing moving.
I borrowed his picture and the information above from his post: Water Wheel on his blog: Pointless Projects. (Thanks, Ren!)
Related Stories
POSTED IN: The Archives
0 opinions for Junk Created Water Wheel
No one has left a comment yet. You know what this means, right? You could be first!
Have an opinion? Leave a comment: